Predictika · Sliding gate operator orders

An AI sales agent's sliding gate operator order, checked before it goes out

An AI sales agent prepares an order for a CAME BXV sliding gate operator: the operator size and version, the accessories, the rack and the figures it orders for the customer's gate. Before it goes out, the agent sends it to Predictika, which checks it against a declarative model of the public CAME General Catalogue and returns a verdict, every reason and the figures it computed.

Scope: CAME BXV 24 V sliding gate operators (BXV04, BXV06, BXV08 and BXV10 in standard, fast and PLUS versions) with their listed accessories and racks, for gates up to 1,000 kg. See everything this validator covers

This validator models orders for the BXV operator family as described in the public CAME General Catalogue (export edition, BXV pages), not just the scenarios shown below.

  • Operator versions — ten operators: BXV04, BXV06 and BXV10 in standard (AGS), fast (AGF) and PLUS (AGE) versions, and the BXV08 in the standard version only.
  • Gate limits — the maximum leaf weight (400, 600, 800 or 1,000 kg) and length (14, 18, 20 or 20 m) listed for each size, checked against the customer's gate.
  • Accessories and racks — the CXN BUS interface is listed for PLUS versions only; the remote release case is listed as an accessory of the pull-cord release device; the nylon rack is listed for gates up to 600 kg.
  • Stated figures — the leaf rating, manoeuvring speed and backup battery capacity the agent orders, each compared with the catalogue figure for the operator.

Any BXV operator order that touches these rules is in scope — not only the scenarios pictured here. Not covered: prices (the catalogue gives none, so there is no price build-up or line items), the other CAME sliding gate families (BK, BKV, BX, BXL and others), the 110 V models sold in the United States, the battery table rows 801MS-0380 and 801MS-0390 (listed in the battery table but not in the range), whether a second operator or the RSE interface card is needed for paired installations, installation and safety-device requirements, and country availability.

The AI sales agentBuilds the gate operator order from the conversation and says it is ready.
Predictika validatorChecks every rule at once and returns the verdict, each finding, and the computed figures.

6 scenarios in 3 groups · each group runs from the agent’s first attempt to the outcome · click one to switch

What the agent proposes

The AI sales agent says

Illustrative agent statement. The validator receives the structured request below.

Proposing agent: AI sales agent (scripted)

Before sending, the agent must call Recorded run

Predictika validator


      

        
        
        
      

      
Waiting for the call.

      
    

  

  
  

    
Where rules-based CPQ gets it wrong
Click to expand
    
Our assessment of what a typical rules-based CPQ (product rules, price rules and validation rules, as in Salesforce CPQ) does with the same cases. It is a judgment about effort and reliability, not a claim that nothing can be built.

    
What the validator caughtTypical rules-based CPQPredictika
A stated leaf rating, speed or battery capacity that belongs to another operatorOnly with care
An agent's stated figure is free text; a rule can compare it with the operator's figure, but each figure for each of the ten operators has to be entered and kept in step with the catalogue.		Each stated figure travels with the order and is compared with the catalogue figure for the operator on every call.
An operator version the catalogue does not list, or an accessory that is listed only with another accessoryOnly with care
A rules-based configurator can hold a list of valid versions and accessory dependencies, but each combination for each of the ten operators has to be entered and kept in step with the catalogue.		The catalogue's listed versions and its accessory dependencies are checked together with the rest of the order on every call.
Every problem returned in one answerOnly with workarounds
Rules tend to fire as a step is completed, so a rep fixes one error and meets the next.		All findings come back together, whatever order the choices arrived in.

  

  

    
What this validator catches: findings from its test cases
Click to expand
    
Every rule is checked on every call, in any order the choices arrive; one problem never hides another. Blocking findings stop the order; approval findings need a person to sign off; everything else is computed.

    
1The gate leaf weighs 401 kg; this operator is rated for gates up to 400 kg.
2The gate leaf is 15 m long; this operator is listed for gates up to 14 m.
3The CAME catalogue lists the BXV08 in the standard version (AGS) only; there is no BXV08 in the fast (AGF) or PLUS (AGE) version.
4The CXN BUS interface 806XG-0080 is listed for PLUS version (AGE) automations only.
5The remote release case 001H3000 is listed as an accessory of the pull-cord release device 001RSDN001, which is not on the order.
6The nylon rack 009CGZP is listed for sliding gates up to 600 kg; the gate leaf weighs 601 kg.
7The order states that the operator takes gates up to 800 kg; the catalogue gives 600 kg for this operator.
8The order states a manoeuvring speed of 11 m/min; the catalogue gives 12 m/min for this operator.
9The order states backup batteries of 1.3 Ah; the catalogue lists 5.0 Ah batteries (not supplied) for this operator.

  

  

    
Scenarios and results
Click to expand
    
The recorded result of the validator for each scenario on this page: the request the AI agent sent, the verdict, and every finding, in the order they appear above.

    
1. PLUS operator: A BXV08 PLUS with a release case

    
The agent's request. Please order one CAME BXV08AGE sliding gate operator with the module 4 galvanized rack 009CGZS, remote release case 001H3000, heating system 001RSDN003, keypad decoding board 001R800 and CXN BUS interface 806XG-0080, for a gate leaf of 780 kg and 19 m. The order states that the operator takes gates up to 800 kg, a manoeuvring speed of 11 m/min and 1.3 Ah backup batteries (not supplied). It is ready to send.

    
Verdict: Blocked.

    
    
      
  • Version not listed for this size. The CAME catalogue lists the BXV08 in the standard version (AGS) only; there is no BXV08 in the fast (AGF) or PLUS (AGE) version.
    • 
      
  • Remote release case needs the pull-cord release. The remote release case 001H3000 is listed as an accessory of the pull-cord release device 001RSDN001, which is not on the order.
    • 
    

    
2. PLUS operator: The agent resubmits after fixing the errors

    
The agent's request. Please order one CAME BXV10AGE sliding gate operator (801MS-0590) with the module 4 galvanized rack 009CGZS, pull-cord release 001RSDN001, remote release case 001H3000, heating system 001RSDN003, keypad decoding board 001R800 and CXN BUS interface 806XG-0080, for a gate leaf of 780 kg and 19 m. The order states that the operator takes gates up to 1,000 kg, a manoeuvring speed of 11 m/min and 1.3 Ah backup batteries (not supplied). It is ready to send.

    
Verdict: Allowed.

    
    
      
  • Order summary. This operator takes gate leaves up to 1000 kg and 20 m at 11 m/min with 1.3 Ah backup batteries (not supplied); 6 accessory and rack item(s) on the order.
    • 
    

    
3. Heavy gate: A 750 kg gate with a BXV06 and a nylon rack

    
The agent's request. Please order one CAME BXV06AGS sliding gate operator (801MS-0180) with the nylon rack 009CGZP, magnetic limit-switch system 001RSDN002, Green Power module 001RGP1, transponder decoding board 001R700 and interface card 002RSE, for a gate leaf of 750 kg and 18 m. The order states that the operator has a manoeuvring speed of 12 m/min and 1.3 Ah backup batteries (not supplied). It is ready to send.

    
Verdict: Blocked.

    
    
      
  • Gate leaf too heavy for the operator. The gate leaf weighs 750 kg; this operator is rated for gates up to 600 kg.
    • 
      
  • Nylon rack limited to 600 kg gates. The nylon rack 009CGZP is listed for sliding gates up to 600 kg; the gate leaf weighs 750 kg.
    • 
    

    
4. Heavy gate: The agent resubmits after fixing the errors

    
The agent's request. Please order one CAME BXV08AGS sliding gate operator (801MS-0210) with the module 4 galvanized rack 009CGZ, magnetic limit-switch system 001RSDN002, Green Power module 001RGP1, transponder decoding board 001R700 and interface card 002RSE, for a gate leaf of 750 kg and 18 m. The order states that the operator takes gates up to 800 kg, a manoeuvring speed of 11 m/min and 1.3 Ah backup batteries (not supplied). It is ready to send.

    
Verdict: Allowed.

    
    
      
  • Order summary. This operator takes gate leaves up to 800 kg and 20 m at 11 m/min with 1.3 Ah backup batteries (not supplied); 5 accessory and rack item(s) on the order.
    • 
    

    
5. Fast operator: A fast BXV06 with the BUS interface and 1.3 Ah batteries

    
The agent's request. Please order one CAME BXV06AGF sliding gate operator (801MS-0190) with the module 4 galvanized rack 009CGZS, magnetic limit-switch system 001RSDN002, transponder decoding board 001R700, emergency and battery charging board 002RLB and CXN BUS interface 806XG-0080, for a gate leaf of 550 kg and 16 m. The order states that the operator takes gates up to 600 kg, a manoeuvring speed of 20 m/min and 1.3 Ah backup batteries (not supplied). It is ready to send.

    
Verdict: Blocked.

    
    
      
  • CXN BUS interface needs a PLUS version. The CXN BUS interface 806XG-0080 is listed for PLUS version (AGE) automations only.
    • 
      
  • Stated battery capacity does not match. The order states backup batteries of 1.3 Ah; the catalogue lists 5.0 Ah batteries (not supplied) for this operator.
    • 
    

    
6. Fast operator: The agent resubmits after fixing the errors

    
The agent's request. Please order one CAME BXV06AGE sliding gate operator (801MS-0580) with the module 4 galvanized rack 009CGZS, magnetic limit-switch system 001RSDN002, transponder decoding board 001R700, emergency and battery charging board 002RLB and CXN BUS interface 806XG-0080, for a gate leaf of 550 kg and 16 m. The order states that the operator takes gates up to 600 kg, a manoeuvring speed of 12 m/min and 1.3 Ah backup batteries (not supplied). It is ready to send.

    
Verdict: Allowed.

    
    
      
  • Order summary. This operator takes gate leaves up to 600 kg and 18 m at 12 m/min with 1.3 Ah backup batteries (not supplied); 5 accessory and rack item(s) on the order.
    • 
    

  

  

    
Narration transcript
Click to expand
    
The text of the narrated walkthrough, step by step.

    
    
      
  1. Welcome to a demo of Predictika's Validator. An AI sales agent prepares an order for a CAME BXV sliding gate operator: the operator size and version, the accessories, the rack and the figures it orders for the customer's gate. Before it goes out, the agent sends it to Predictika, which checks it against a declarative model of the public CAME General Catalogue and returns a verdict, every reason and the figures it computed.
    2. 
      
  2. I will start with the first request by the agent.
    3. 
      
  3. The agent says. Please order one CAME BXV08AGE sliding gate operator with the module 4 galvanized rack 009CGZS, remote release case 001H3000, heating system 001RSDN003. The order states that the operator takes gates up to 800 kg, a manoeuvring speed of 11 m/min and 1.3 Ah backup batteries (not supplied). The rest of the request is on screen.
    4. 
      
  4. Before it goes out, the agent calls the validator.
    5. 
      
  5. Blocked, with two findings, all in one answer. The CAME catalogue lists the BXV08 in the standard version (AGS) only; there is no BXV08 in the fast (AGF) or PLUS (AGE) version. The remote release case 001H3000 is listed as an accessory of the pull-cord release device 001RSDN001, which is not on the order.
    6. 
      
  6. The validator returned two blocking findings in one answer. A check that reads one field at a time would pass most of this; it shows only when the choices in the order are checked against each other.
    7. 
      
  7. What this shows: for an operator version the catalogue does not list, or an accessory that is listed only with another accessory, a rules-based CPQ is error-prone for this.
    8. 
      
  8. Now the agent resubmits.
    9. 
      
  9. The corrected request. It changes the operator to BXV10AGE, the accessories to pull-cord release 001RSDN001, remote release case 001H3000, heating system 001RSDN003, keypad decoding board 001R800, CXN BUS interface 806XG-0080 and the stated leaf rating to 1,000 kg.
    10. 
      
  10. It calls the validator again.
    11. 
      
  11. This time the validator clears it.
    12. 
      
  12. Both earlier findings are cleared, and the validator's figure matches the order.
    13. 
      
  13. Two problems caught in one call, fixed in one pass, and a clean order. That is the value of Predictika's validator: catching mistakes before they reach the customer. Now you can try the other scenarios yourself.
    14.