Predictika · Rotary transfer machine orders

An AI sales agent's rotary transfer machine order, checked before it goes out

An AI sales agent prepares an order for a Multistar-class rotary transfer machine: the model, its machining units, the workpiece, the output rate and the drive options. Before it goes out, the agent sends it to Predictika, which checks it against a declarative model of the published machine limits and returns a verdict, every reason and the figures it computed.

Scope: Multistar LX-24 (LX-24/1000, LX-24/1500) and CX-24 rotary transfer machine orders: machining units, workpiece, cycle rate, drive and station options. See everything this validator covers

This validator models Multistar LX-24 and CX-24 rotary transfer machine orders, not just the scenarios shown below.

  • Machining units — upper, lower and lateral units per model (the LX-24/1000 has no lateral units), and no more than 44 units on a machine.
  • Workpiece and cycle — clamping diameter range, machining length, spindle speed and rating, and the highest output rate in single and multiple cycle for each model.
  • Drive and station options — central cam on the LX-24, linear cams or the CNC version (up to 20 axes) on the CX-24, chuck indexing and rotation on the CX-24 only, monoblock or adjustable stations (off-center machining on the monoblock version, and adjustable stations on the LX-24, go to a person for confirmation), 48 clamping fixtures for part turn-over, and the transformer for voltages other than 400 V on the LX-24.

Any Multistar LX-24 or CX-24 order that touches these rules is in scope — not only the scenarios pictured here. Not covered: prices (this validator produces no price build-up or line-item quote), the higher figures in the family brochure (150 cycles per minute, 32,000 rpm, 60 mm), which are not tied to a model, so the model-specific data sheets are used, the Multistar NX-24, other Mikron machine families, loading and feeding systems, tooling, and delivery or service terms.

The AI sales agentBuilds the machine order from the conversation and says it is ready.
Predictika validatorChecks every rule at once and returns the verdict, each finding, and the computed figures.

7 scenarios in 3 groups · each group runs from the agent’s first attempt to the outcome · click one to switch

What the agent proposes

The AI sales agent says

Illustrative agent statement. The validator receives the structured request below.

Proposing agent: AI sales agent (scripted)

Before sending, the agent must call Recorded run

Predictika validator


      

        
        
        
      

      
Waiting for the call.

      
    

  

  
  

    
Where rules-based CPQ gets it wrong
Click to expand
    
Our assessment of what a typical rules-based CPQ (product rules, price rules and validation rules, as in Salesforce CPQ) does with the same cases. It is a judgment about effort and reliability, not a claim that nothing can be built.

    
What the validator caughtTypical rules-based CPQPredictika
Unit counts that depend on the modelOnly with care
A limit per model and per unit position (upper, lower, lateral) plus a machine-wide total. It works, but every model and position is another rule to maintain.		The model and every unit count are in one request; each position and the total are checked together.
Options that exist on one model onlyOnly with workarounds
Central cam, linear cams, CNC, chuck rotation and adjustable stations each depend on the model chosen on another line, so they need cross-line rules that interact.		Every choice is in one request, so a conflict is found whichever order the choices arrive in.
Output rate that depends on model and cycle modeOnly with care
The limit is a table of model by cycle mode; each cell needs its own rule or lookup, and someone has to keep it in step with the data sheet.		The limit is computed on every call from the model and cycle mode and compared with the rate asked for.
Stated unit count that must match the configurationOnly with care
A stated figure is a free-entry field; a rule can compare it with a computed total, but someone has to write and maintain that comparison.		The stated figure travels with the order and is compared with the computed figure on every call.
Every problem returned in one answerOnly with workarounds
Rules tend to fire as the order is saved or a step is completed, so a rep often fixes one error and meets the next.		All findings come back together, whatever order the choices arrived in.

  

  

    
What this validator catches: findings from its test cases
Click to expand
    
Every rule is checked on every call, in any order the choices arrive; one problem never hides another. Blocking findings stop the quote; approval findings need a person to sign off; everything else is computed.

    
1The CX-24 datasheet says the monoblock version suits mainly centric operations and offers adjustable stations for off-center or sloping processing; a person should confirm off-center machining on the monoblock version.
2Adjustable station supports are described in the Mikron datasheets for the CX-24 only, not for the LX-24; a person should confirm.
324 upper machining units are specified, but the selected model takes at most 23.
423 lower machining units are specified, but a Multistar takes at most 22.
5The Multistar LX-24/1,000 has no lateral machining units; lateral machining needs the LX-24/1,500 or the CX-24.
623 lateral machining units are specified, but the selected model takes at most 22.
7The machining units add up to 46, but a Multistar carries at most 44.
8The workpiece diameter is outside the clamping range of the selected model (LX-24: 0.4 to 10 mm; CX-24: 0.6 to 30 mm).
9A machining length of 40 mm exceeds the 35 mm the selected model allows.
10A machining length of 54 mm exceeds the 53 mm the selected model allows.
11The quote asks for 80 parts per minute, but the selected model delivers at most 70 parts per minute in this cycle mode.
12The quote asks for 300 parts per minute, but the selected model delivers at most 280 parts per minute in this cycle mode.
13The quote asks for 125 parts per minute, but the selected model delivers at most 120 parts per minute in this cycle mode.
14The quote asks for 510 parts per minute, but the selected model delivers at most 500 parts per minute in this cycle mode.
15A spindle speed of 23,000 rpm exceeds the 22,000 rpm of the selected model.
16A spindle speed of 24,000 rpm exceeds the 23,000 rpm of the selected model.
17A spindle rating of 250 W exceeds the 200 W of the selected model.
18A spindle rating of 1,200 W exceeds the 1,000 W of the selected model.
19The selected feed control is not available on this model: the LX-24 has a central cam only; the CX-24 has linear cams or the CNC version.
20The CX-24 CNC version drives at most 20 axes; the quote asks for 22.
21The LX-24 has no chuck indexing and no workpiece rotation; those need the CX-24.
22On the CX-24 the largest clamping diameter is 24 mm with chuck indexing and 15 mm with rotating chucks.
23The CX-24 chuck drive turns at most 6,000 rpm; the quote asks for 7,000 rpm.
24Turning a part over into a second collet on the CX-24 needs the 48-fixture version; the quote has 24.
25The LX-24 runs on 400 V, 3 phases; other voltages need the optional transformer.
26The quote states 40 machining units, but the units configured add up to 32.
27The quote states 28 machining units, but the units configured add up to 32.
28The quote asks for 90 parts per minute, but the selected model delivers at most 70 parts per minute in this cycle mode.
29The CX-24 CNC version drives at most 20 axes; the quote asks for 24.
30The quote states 40 machining units, but the units configured add up to 42.

  

  

    
Scenarios and results
Click to expand
    
The recorded result of the validator for each scenario on this page: the request the AI agent sent, the verdict, and every finding, in the order they appear above.

    
1. CX-24 off-center machining: A CX-24 order with off-center machining, 24 upper units and 90 parts per minute

    
The agent's request. Please quote a Multistar CX-24 with 24 upper, 12 lower and 6 lateral machining units (42 in total) for an 8 mm workpiece, a machining length of 40 mm and 90 parts per minute in single cycle, linear cams feed, fixed chucks, monoblock stations for off-center machining. The quote states 36 machining units in total. It is ready to send.

    
Verdict: Blocked.

    
    
      
  • Too many upper units. 24 upper machining units are specified, but the selected model takes at most 23.
    • 
      
  • Output rate too high. The quote asks for 90 parts per minute, but the selected model delivers at most 70 parts per minute in this cycle mode.
    • 
      
  • Stated machining units differ from the quote. The quote states 36 machining units, but the units configured add up to 42.
    • 
      
  • Off-center machining on monoblock stations. The CX-24 datasheet says the monoblock version suits mainly centric operations and offers adjustable stations for off-center or sloping processing; a person should confirm off-center machining on the monoblock version.
    • 
    

    
2. CX-24 off-center machining: The agent resubmits after fixing the errors

    
The agent's request. Please quote a Multistar CX-24 with 22 upper, 12 lower and 6 lateral machining units (40 in total) for an 8 mm workpiece, a machining length of 40 mm and 90 parts per minute in multiple cycle, linear cams feed, fixed chucks, adjustable stations for off-center machining. The quote states 40 machining units in total. It is ready to send.

    
Verdict: Allowed.

    
    
      
  • Order summary. 40 machining units configured; the selected model delivers at most 280 parts per minute in this cycle mode.
    • 
    

    
3. LX-24 with lateral units: An LX-24/1000 order with lateral units, 130 parts per minute and a 230 V supply

    
The agent's request. Please quote a Multistar LX-24/1000 with 16 upper, 14 lower and 6 lateral machining units (36 in total) for a 4 mm workpiece, a machining length of 25 mm and 130 parts per minute in single cycle, central cam feed, fixed chucks, supplied at 230 V. The quote states 30 machining units in total. It is ready to send.

    
Verdict: Blocked.

    
    
      
  • No lateral units on the LX-24/1000. The Multistar LX-24/1,000 has no lateral machining units; lateral machining needs the LX-24/1,500 or the CX-24.
    • 
      
  • Output rate too high. The quote asks for 130 parts per minute, but the selected model delivers at most 120 parts per minute in this cycle mode.
    • 
      
  • LX-24 voltage needs a transformer. The LX-24 runs on 400 V, 3 phases; other voltages need the optional transformer.
    • 
      
  • Stated machining units differ from the quote. The quote states 30 machining units, but the units configured add up to 36.
    • 
    

    
4. LX-24 with lateral units: The agent resubmits after fixing the errors

    
The agent's request. Please quote a Multistar LX-24/1500 with 16 upper, 14 lower and 6 lateral machining units (36 in total) for a 4 mm workpiece, a machining length of 25 mm and 130 parts per minute in single cycle, central cam feed, fixed chucks, supplied at 230 V. The quote states 36 machining units in total. It is ready to send.

    
Verdict: Blocked.

    
    
      
  • LX-24 voltage needs a transformer. The LX-24 runs on 400 V, 3 phases; other voltages need the optional transformer.
    • 
    

    
5. LX-24 with lateral units: The agent resubmits after fixing the errors

    
The agent's request. Please quote a Multistar LX-24/1500 with 16 upper, 14 lower and 6 lateral machining units (36 in total) for a 4 mm workpiece, a machining length of 25 mm and 130 parts per minute in single cycle, central cam feed, fixed chucks, supplied at 230 V with the transformer. The quote states 36 machining units in total. It is ready to send.

    
Verdict: Allowed.

    
    
      
  • Order summary. 36 machining units configured; the selected model delivers at most 140 parts per minute in this cycle mode.
    • 
    

    
6. CX-24 CNC and rotating chucks: A CX-24 CNC order with 24 axes and rotating chucks on an 18 mm part

    
The agent's request. Please quote a Multistar CX-24 with 16 upper, 14 lower and 8 lateral machining units (38 in total) for an 18 mm workpiece, a machining length of 40 mm and 60 parts per minute in single cycle, CNC version feed with 24 CNC axes, rotating chucks at 7000 rpm, monoblock stations. The quote states 36 machining units in total. It is ready to send.

    
Verdict: Blocked.

    
    
      
  • Too many CNC axes. The CX-24 CNC version drives at most 20 axes; the quote asks for 24.
    • 
      
  • Workpiece too large for indexing or rotating chucks. On the CX-24 the largest clamping diameter is 24 mm with chuck indexing and 15 mm with rotating chucks.
    • 
      
  • Chuck drive speed too high. The CX-24 chuck drive turns at most 6,000 rpm; the quote asks for 7,000 rpm.
    • 
      
  • Stated machining units differ from the quote. The quote states 36 machining units, but the units configured add up to 38.
    • 
    

    
7. CX-24 CNC and rotating chucks: The agent resubmits after fixing the errors

    
The agent's request. Please quote a Multistar CX-24 with 16 upper, 14 lower and 8 lateral machining units (38 in total) for an 18 mm workpiece, a machining length of 40 mm and 60 parts per minute in single cycle, CNC version feed with 20 CNC axes, chuck indexing (360 degrees), monoblock stations. The quote states 38 machining units in total. It is ready to send.

    
Verdict: Allowed.

    
    
      
  • Order summary. 38 machining units configured; the selected model delivers at most 70 parts per minute in this cycle mode.
    • 
    

  

  

    
Narration transcript
Click to expand
    
The text of the narrated walkthrough, step by step.

    
    
      
  1. Welcome to a demo of Predictika's Validator. An AI sales agent prepares an order for a Multistar-class rotary transfer machine: the model, its machining units, the workpiece, and more. Before it goes out, the agent sends it to Predictika, which checks it against a declarative model of the published machine limits and returns a verdict, every reason and the figures it computed.
    2. 
      
  2. I will start with the first request by the agent.
    3. 
      
  3. The agent says. Please quote a Multistar LX-24/1000 with 16 upper, 14 lower and 6 lateral machining units (36 in total) for a 4 mm workpiece. The quote states 30 machining units in total. The rest of the request is on screen.
    4. 
      
  4. Before it goes out, the agent calls the validator.
    5. 
      
  5. Blocked, with four findings, all in one answer. The Multistar LX-24/1,000 has no lateral machining units; lateral machining needs the LX-24/1,500 or the CX-24. The quote asks for 130 parts per minute, but the selected model delivers at most 120 parts per minute in this cycle mode. The LX-24 runs on 400 V, 3 phases; other voltages need the optional transformer. The other one is on screen.
    6. 
      
  6. The validator returned four blocking findings in one answer. A check that reads one field at a time would pass most of this; it shows only when the choices in the quote are checked against each other.
    7. 
      
  7. What this shows: for output rate that depends on model and cycle mode, a rules-based CPQ is error-prone for this.
    8. 
      
  8. Now the agent resubmits.
    9. 
      
  9. The corrected request. It changes the model to Multistar LX-24/1500 and the stated machining units in total to 36.
    10. 
      
  10. It calls the validator again.
    11. 
      
  11. Still blocked, with one finding, all in one answer. The LX-24 runs on 400 V, 3 phases; other voltages need the optional transformer.
    12. 
      
  12. Three findings cleared. Still blocking: LX-24 voltage needs a transformer.
    13. 
      
  13. The agent resubmits once more.
    14. 
      
  14. The revised request. It sets the transformer to fitted.
    15. 
      
  15. It calls the validator once more.
    16. 
      
  16. This time the validator clears it.
    17. 
      
  17. The earlier finding is cleared, and the validator's figure matches the quote.
    18. 
      
  18. Four problems caught in one call, fixed in two passes, and a clean quote. That is the value of Predictika's validator: catching mistakes before they reach the customer. Now you can try the other scenarios yourself.
    19.