Predictika · Leak repair configuration: enclosure type, size, rating, design, bend fitting, pressure, temperature, quantity and sealant

An AI sales agent's TEAM modular leak repair enclosure order, checked before it goes out

An AI sales agent prepares an order for TEAM standard modular leak repair enclosures: straight run or 90 degree bend, the pipe size, the pressure rating, the design, the bend fitting, the line pressure and temperature, the number of enclosures and the sealing method. Before it goes out, the agent sends it to Predictika, which checks it against a declarative model of the published catalog and returns a verdict, every reason and the figures it computed.

Scope: TEAM standard modular leak repair enclosures (straight run and 90 degree bend, block and fabricated design, 1/2 to 12 inch, 350 and 750 psi): catalog availability, design, bend fitting, pressure, temperature, quantity, weight, injectors and sealant. See everything this validator covers

This validator models orders for one product line, the TEAM modular leak repair enclosures listed in the company's Modular Leak Repair Enclosures catalog (version 2.0, August 2024), not just the scenarios shown below.

  • Catalog parts — the 30 listed enclosures: straight run and 90 degree bend, in block design (1/2, 3/4, 1, 1 1/2, 2, 3, 4 and 6 inch at 750 psi) and fabricated design (6 inch at 350 psi, 8, 10 and 12 inch at 350 and 750 psi), each with its catalog part number, weight, injectors and sealant volumes.
  • Bend fitting — short radius, socket weld or screwed for the 1/2 to 2 inch bend enclosures, long radius for 3 inch and larger.
  • Service limits — 350 psi or 750 psi pressure rating and minus 20 F to 750 F temperature, as stated in the catalog's standard specification.
  • Quantity, weight and sealant — total weight, total injectors and total sealant volume for the quantity ordered and the sealing method (perimeter seal, void fill or both), compared with the totals an order states.

Any order for these enclosures that touches these rules is in scope — not only the scenarios pictured here. Not covered: prices and field service rates (the catalog gives none, so this validator produces no price build-up or line-item quote), custom engineered repairs, enclosure connectors and strong-back restraints as separate items, other TEAM repair products, installation, and inspection or heat treating services.

The AI sales agentBuilds the enclosure order from the customer's request and says it is ready.
Predictika validatorChecks every rule at once and returns the verdict, each finding, and the computed figures.

7 scenarios in 3 groups · each group runs from the agent’s first attempt to the outcome · click one to switch

What the agent proposes

The AI sales agent says

Illustrative agent statement. The validator receives the structured request below.

Proposing agent: AI sales agent (scripted)

Before sending, the agent must call Recorded run

Predictika validator


      

        
        
        
      

      
Waiting for the call.

      
    

  

  
  

    
Where rules-based CPQ gets it wrong
Click to expand
    
Our assessment of what a typical rules-based CPQ (product rules, price rules and validation rules, as in Salesforce CPQ) does with the same cases. It is a judgment about effort and reliability, not a claim that nothing can be built.

    
What the validator caughtTypical rules-based CPQPredictika
Which size, rating and design existOnly with workarounds
The catalog lists 30 specific enclosures; 6 inch exists at both ratings but in different designs, and many size and rating pairs do not exist. A rules-based CPQ needs a rule or a table row for every pairing.		The size, rating, design and enclosure type are checked together against the catalog on every call.
Bend fitting by sizeOnly with care
The fitting choices change at 3 inch, and the rule is easy to leave out of a product rule set.		Short radius, socket weld, screwed and long radius are checked against the size of the bend.
Service limitsOnly with care
Pressure against the rating and temperature against the limits are checks on numbers the rep types, often left to the engineer.		Pressure and temperature are checked at the limit and just beyond it.
Totals against stated figuresOnly with care
Total weight and sealant volume depend on quantity and sealing method, and a typed figure is easy to get wrong.		Totals are computed from the catalog and compared with the figures the order states.
Every problem returned in one answerOnly with workarounds
Rules tend to fire as the order is saved or a step is completed, so a rep often fixes one error and meets the next.		All findings come back together, whatever order the choices arrived in.

  

  

    
What this validator catches: findings from its test cases
Click to expand
    
Every rule is checked on every call, in any order the choices arrive; one problem never hides another. Blocking findings stop the quote; approval findings need a person to sign off; everything else is computed.

    
1The requested design does not match the catalog; the 1/2 to 6 inch 750 psi enclosures are block design and the 6 to 12 inch 350 psi and 8 to 12 inch 750 psi enclosures are fabricated design.
2The catalog lists no standard enclosure for this combination; block-design enclosures are 1/2 to 6 inch at 750 psi, and fabricated-design enclosures are 6 to 12 inch at 350 psi and 8 to 12 inch at 750 psi.
3The requested bend fitting is not available for this size; 1/2 to 2 inch bend enclosures are listed as short radius, socket weld or screwed, and 3 inch and larger bend enclosures are long radius.
4The operating pressure is 751 psi, above the 750 psi rating of the selected enclosure; TEAM standard modular enclosures are rated 350 psi or 750 psi.
5The operating pressure is 351 psi, above the 350 psi rating of the selected enclosure; TEAM standard modular enclosures are rated 350 psi or 750 psi.
6The service temperature is -21 F, outside the standard enclosure limits of minus 20 F to 750 F.
7The service temperature is 751 F, outside the standard enclosure limits of minus 20 F to 750 F.
8The order has 0 enclosures; at least 1 is needed.
9The order states a total weight of 100 lb, but the catalog weight of the selected enclosures totals 184 lb.
10The order states 100 cubic inches of sealant, but the catalog sealant volume for the selected enclosures and sealing method totals 184 cubic inches.
11The operating pressure is 800 psi, above the 750 psi rating of the selected enclosure; TEAM standard modular enclosures are rated 350 psi or 750 psi.
12The service temperature is 800 F, outside the standard enclosure limits of minus 20 F to 750 F.

  

  

    
Scenarios and results
Click to expand
    
The recorded result of the validator for each scenario on this page: the request the AI agent sent, the verdict, and every finding, in the order they appear above.

    
1. 6 inch straight run: Two straight run enclosures for a 6 inch line at 500 psi

    
The agent's request. Please order 2 straight run leak repair enclosures for the Bayou Ridge Refining 6 inch line, 350 psi rated, in fabricated design. The line runs at 500 psi and 400 F, and the repair will use perimeter seal and void fill. The order states a total weight of 256 lb and 394 cubic inches of sealant. It is ready to send.

    
Verdict: Blocked.

    
    
      
  • Pressure above the enclosure rating. The operating pressure is 500 psi, above the 350 psi rating of the selected enclosure; TEAM standard modular enclosures are rated 350 psi or 750 psi.
    • 
    

    
2. 6 inch straight run: The agent resubmits after fixing the errors

    
The agent's request. Please order 2 straight run leak repair enclosures for the Bayou Ridge Refining 6 inch line, 750 psi rated, in block design. The line runs at 500 psi and 400 F, and the repair will use perimeter seal and void fill. The order states a total weight of 390 lb and 494 cubic inches of sealant. It is ready to send.

    
Verdict: Allowed.

    
    
      
  • Order summary. Catalog part LST-3-606-02-A2-001; 2 enclosure(s) weigh 390 lb in total, need 52 injectors and 494 cubic inches of sealant.
    • 
    

    
3. 10 inch 90 degree bends: Four 90 degree bend enclosures for a 10 inch line at 700 psi

    
The agent's request. Please order 4 90 degree bend leak repair enclosures for the Bayou Ridge Refining 10 inch line, 750 psi rated, in block design, with the short radius fitting. The line runs at 700 psi and 450 F, and the repair will use perimeter seal and void fill. The order states a total weight of 2,080 lb and 4,380 cubic inches of sealant. It is ready to send.

    
Verdict: Blocked.

    
    
      
  • Design does not match the catalog part. The requested design does not match the catalog; the 1/2 to 6 inch 750 psi enclosures are block design and the 6 to 12 inch 350 psi and 8 to 12 inch 750 psi enclosures are fabricated design.
    • 
      
  • Bend fitting not available for this size. The requested bend fitting is not available for this size; 1/2 to 2 inch bend enclosures are listed as short radius, socket weld or screwed, and 3 inch and larger bend enclosures are long radius.
    • 
    

    
4. 10 inch 90 degree bends: The agent resubmits after fixing the errors

    
The agent's request. Please order 4 90 degree bend leak repair enclosures for the Bayou Ridge Refining 10 inch line, 750 psi rated, in fabricated design, with the short radius fitting. The line runs at 700 psi and 450 F, and the repair will use perimeter seal and void fill. The order states a total weight of 2,080 lb and 4,380 cubic inches of sealant. It is ready to send.

    
Verdict: Blocked.

    
    
      
  • Bend fitting not available for this size. The requested bend fitting is not available for this size; 1/2 to 2 inch bend enclosures are listed as short radius, socket weld or screwed, and 3 inch and larger bend enclosures are long radius.
    • 
    

    
5. 10 inch 90 degree bends: The agent resubmits after fixing the errors

    
The agent's request. Please order 4 90 degree bend leak repair enclosures for the Bayou Ridge Refining 10 inch line, 750 psi rated, in fabricated design, with the long radius fitting. The line runs at 700 psi and 450 F, and the repair will use perimeter seal and void fill. The order states a total weight of 2,080 lb and 4,380 cubic inches of sealant. It is ready to send.

    
Verdict: Allowed.

    
    
      
  • Order summary. Catalog part LEL-3-1,010-02-A2-001; 4 enclosure(s) weigh 2,080 lb in total, need 216 injectors and 4,380 cubic inches of sealant.
    • 
    

    
6. 8 inch 90 degree bends: Three 8 inch bend enclosures with stated totals

    
The agent's request. Please order 3 90 degree bend leak repair enclosures for the Bayou Ridge Refining 8 inch line, 350 psi rated, in fabricated design, with the long radius fitting. The line runs at 300 psi and 250 F, and the repair will use perimeter seal and void fill. The order states a total weight of 1,128 lb and 3,000 cubic inches of sealant. It is ready to send.

    
Verdict: Blocked.

    
    
      
  • Stated sealant volume does not match. The order states 3,000 cubic inches of sealant, but the catalog sealant volume for the selected enclosures and sealing method totals 4,005 cubic inches.
    • 
    

    
7. 8 inch 90 degree bends: The agent resubmits after fixing the errors

    
The agent's request. Please order 3 90 degree bend leak repair enclosures for the Bayou Ridge Refining 8 inch line, 350 psi rated, in fabricated design, with the long radius fitting. The line runs at 300 psi and 250 F, and the repair will use perimeter seal and void fill. The order states a total weight of 1,128 lb and 4,005 cubic inches of sealant. It is ready to send.

    
Verdict: Allowed.

    
    
      
  • Order summary. Catalog part LEL-1-808-02-A2-001; 3 enclosure(s) weigh 1,128 lb in total, need 132 injectors and 4,005 cubic inches of sealant.
    • 
    

  

  

    
Narration transcript
Click to expand
    
The text of the narrated walkthrough, step by step.

    
    
      
  1. Welcome to a demo of Predictika's Validator. An AI sales agent prepares an order for TEAM standard modular leak repair enclosures: straight run or 90 degree bend, the pipe size, the pressure rating, and more. Before it goes out, the agent sends it to Predictika, which checks it against a declarative model of the published catalog and returns a verdict, every reason and the figures it computed.
    2. 
      
  2. I will start with the first request by the agent.
    3. 
      
  3. The agent says. Please order 4 90 degree bend leak repair enclosures for the Bayou Ridge Refining 10 inch line, 750 psi rated, in block design, with the short radius fitting. The line runs at 700 psi and 450 F, and the repair will use perimeter seal and void fill. The rest of the request is on screen. The order states a total weight of 2,080 lb and 4,380 cubic inches of sealant.
    4. 
      
  4. Before it goes out, the agent calls the validator.
    5. 
      
  5. Blocked, with two findings, all in one answer. The requested design does not match the catalog; the 1/2 to 6 inch 750 psi enclosures are block design and the 6 to 12 inch 350 psi and 8 to 12 inch 750 psi enclosures are fabricated design. The requested bend fitting is not available for this size; 1/2 to 2 inch bend enclosures are listed as short radius, socket weld or screwed, and 3 inch and larger bend enclosures are long radius.
    6. 
      
  6. The validator returned two blocking findings in one answer. A check that reads one field at a time would pass most of this; it shows only when the choices in the quote are checked against each other.
    7. 
      
  7. What this shows: for bend fitting by size, a rules-based CPQ is error-prone for this.
    8. 
      
  8. Now the agent resubmits.
    9. 
      
  9. The corrected request. It changes the design to fabricated design.
    10. 
      
  10. It calls the validator again.
    11. 
      
  11. Still blocked, with one finding, all in one answer. The requested bend fitting is not available for this size; 1/2 to 2 inch bend enclosures are listed as short radius, socket weld or screwed, and 3 inch and larger bend enclosures are long radius.
    12. 
      
  12. One finding cleared. Still blocking: bend fitting not available for this size.
    13. 
      
  13. The agent resubmits once more.
    14. 
      
  14. The revised request. It changes the bend fitting to long radius.
    15. 
      
  15. It calls the validator once more.
    16. 
      
  16. This time the validator clears it.
    17. 
      
  17. The earlier finding is cleared, and the validator's figure matches the quote.
    18. 
      
  18. Two problems caught in one call, fixed in two passes, and a clean quote. That is the value of Predictika's validator: catching mistakes before they reach the customer. Now you can try the other scenarios yourself.
    19.